AUDIE D. DIVINAGRACIA
2717 Cool Lilac Ave.
Henderson, NV 89052
Phone: 702 769 4540
Alt: 702 463 3645
To gain an employment with a company where my Engineering background and technical knowledge in the field of construction can be applied effectively.
SUMMARY OF QUALIFICATIONS:
Applied established Engineering standard and principles in every work responsibilities to maintain an ensured quality work output.
Ensured that goals and objectives were accomplished in accordance with outlined schedule and priorities, safety and time limitation.
Ch2m Hill E&C Inc.(Power Division)
9191 South Jamaica Street, Englewood, CO 80112
January 2013 to present
PACIFIC CORPORATION – Lake Side 2 Power Plant, Vineyard, UT
635 MW Natural Gas-Fired 2X1 Combined-Cycle Power Plant
Work in the installation/erection of pipeworks and mechanical components connecting :
Combustion Turbine ( Two Units ) :
Rotor Air Cooler and Boiler System lines
Fuel Gas lines / Fuel manifold lines
Lube oil system lines
Multi-stage Compressed Air and bleeder system lines
Steam Turbine Generator ( STG ) system :
Internal Cooling system lines
Steam condensate lines
Reheat steam lines
Main steam lines
Turbine / Generator Lube oil lines
Auxilliary Boiler system :
Superheated steam lines
Feedwater system lines
Water Treatment System :
Raw water lines
Demineralized water lines
Works include lay out for Carbon steel, Chrome-Moly, and Stainless steel pipe material, rigging, spool fabrication, fit up/install pre fabricated pipe spools, valves, fittings, pipe supports, flange bolting and work with blue prints, shop drawings/specifications for every work assignment.
Brinderson Construction Inc.
19600 Wilmington Ave., Carson, CA 90746
October 2012 to November 2012
OLIN CHLOR ALKALI, Henderson, NV
Worked for the four-month shutdown of the HCL unit of the facility.
Works includes spool fabrication and installation, tie-ins of existing in-service lines to the newly installed lines that includes ¾ inch to 3 inches Carbon Steel ( Threaded/Socket Weld ) for:
Instrument Air lines
Utility Air lines
Utility Water lines
Performed Tag out/Lock out for every system with the entire crew inside the facility, fit-up/install valves, fittings, pipe guides, slides, and anchors, flange bolting to a required torque, work with shop drawings/specifications for spool fabrication and installation.
Tech USA / Interstate Mechanical Corporation
8222 S 48th Street, Phoenix, AZ 85044
July 2012 to October 2012
INTEL FAB 42 - Chandler, AZ
Worked directly in the installation of pipeworks in the 65-foot high trestle connecting Process Utilities Building ( PUB ) and Fab 42 building:
1 inch to 30 inches Carbon Steel pipes for:
Chilled Water System
Heat Recovery Water System
Secondary Heat Recovery Water System
Hot Water Recovery System
Works includes lay out for a butt weld joint system, rigging, torch cutting/beveling, flange bolting to a required torque, fit-up/install valves, fittings, pre-insulated pipe guides, slides, anchors and supports, works with blue prints, shop drawings and make detailed sketches, schematic drawings for spool fabrication and installation.
ALS (a Division of) E & O Mechanical Inc., 800 Broadway, Haverhill, MA 01832
December 2011 to July 2012
FAULTLESS LAUNDRY COMPANY - St. Louis, MO
NEW YORK LAUNDRY COMPANY – Orangestad, Aruba
METROPOLITAN LINEN – Haverhill, MA
CLEANCARE LINEN – Pittsburgh, PA
Worked directly in the installation of pipeworks and mechanical components in the facility. Works include lay out of a butt weld joint piping system, rigging, threading, torch cutting/beveling, bridge tack welding, soldering, brazing, flange bolting to a required torque, fit-up/install valves and fittings, hangers and supports, work with blueprints, shop drawings, specifications, and make detailed sketches, schematic drawings for fabrication and installation, use of testing equipment to check systems for leaks and assist in start up works of the system.
Alliance Mechanical Inc., Las Vegas, NV
February 2010 to April 2011
NEW VA MEDICAL CENTER, Las Vegas, NV
Worked directly in the installation of pipeworks and mechanical components in the Central plant:
½ inch to 16 inches Carbon Steel pipes connecting:
3 Units - 24,000 Lbs/Hr @ 200Psig (700HP / 27.1 MBTU/HR) Steam Boiler
1 Unit - 2,450 Gal Tank Storage capacity- Duplex Condensate System
1 Unit - 3,100 Gal/75,000Lbs/Hr Feedwater/Deaerator and Storage Vessel
½ inch to 24 inches Carbon Steel pipes, and ½ inch to 4 inches Copper pipes connecting:
4 Units - 1,200 Tons Water Chiller
4 Units - 120 HP/1850 Gpm-10 inches Chilled Water Pump
4 Units -125 HP/2400 Gpm-10 inches Condensing Water Pump
4 Units -1,100 Tons Mechanical (Induced) Draft Counter Flow
1 Unit - 25 HP/750 Gpm- 6 inches Auto-Purge Centrifugal Separator Cooling Tower water filtration system
Installation works include lay out of a butt weld and groove end joint system, rigging, measure, torch cutting/beveling, grinding, grooving, threading, bending, tack welding, soldering, brazing, flange bolting to a required torque, assemble, fit-up/install valves, fittings, hangers, pipe guides, anchors, work with Blueprints, shop drawings, Specifications and make detailed sketches, schematic drawings for fabrication and installation, use of testing equipment to check systems for leaks and assist in start up works of the systems.
Atlas Mechanical Inc., Las Vegas, NV
April 2006 to May 2008
ONE LAS VEGAS TOWERS: Two twenty one-story Residential/Condominium Towers
Las Vegas, NV
BLUEGREEN RESORT ; Seven-story Time Share Resort, Las Vegas, NV
Worked directly in the installation of pipeworks and mechanical components in the central plant (Hydronic Loop) of a Water Sourced Heat Pump system:
½ inch o 14 inches Carbon Steel pipes connecting:
4,000 Lbs/Hr. @125 Psig/ 85HP Hot Water Boiler
85 HP/ 1800 GPM- 6 inches Condensing Water Pumps
750 Tons Mechanical (Induced) Draft CounterFlow Cooling Tower
½ inch to 4 inches Copper pipes connecting all floors of the building
Works includes lay out of a butt weld and groove end joint system, measure, threading, torch cutting/beveling, grooving, bending, grinding, tack welding, soldering, brazing, crimping, assemble, flange bolting, fit-up/install valves, fittings, pipe hanger, pipe guides, anchors and supports, work with Blueprints, shop drawings, Specifications, and make detailed sketches, schematic drawings for fabrication and installation, and use of testing equipment to check systems for leaks.
DB Corporation , Iloilo City, Philippines
Pipefitter/Foreman / Supervisor
September 1988 to April 2005
80 TON per DAY - RICE MILLING PLANT
60 TON per YEAR - INTENSIVE CULTURE AQUA FARM
Worked as a Pipefitter during the seven month probationary period. Duties and responsibilities includes installation and erection of ½ inch to 18 inches of carbon steel and stainless steel pipes.
Supervision includes repairs, modifications, preventive and predictive maintenance on aqua farm and plant equipments, fixtures, and systems that includes:
6 Units- 4.5 KW / 6.5 Ton Auto-Moisture level Shut off Grain Drier
1 Unit –112 KW/140 KVA - 3PH/230V Cummins Standby Generating set
1 Unit - 2.2 KW / 3 Ton/Hr. Combined Cleaning Separator – use for
precleaning, cleaning, and stoning grains.
3 Units- 2.5 KW / 1.5 Ton/Hr. Rubber Roller Huller – use as paddy husker.
7 Units- 1.5 KW Low - Speed Elevators- use to lift the grains vertically to fed
different grains processing machines.
3 Units- 120 HP / 1200 Gpm – 18” 2- Stage Vertical Turbine Pumps – use to
maintain pond water elevation.
48 Units- 1.5 KW Low – Speed Paddle Wheels- use to maintain high level
of dissolved oxygen on the water inside the pond.
1 Unit- 105 KW/131 KVA- 3PH/230V Lovol / Man Standby Generating set
Works includes estimates, plans, and executes high priority work orders for every
repair and maintenance works. Trains, develop, and disciplines subordinate staff.
Engineering Equipment Inc. (EEI), Minah Abdullah, Kuwait
Braun Transworld Corp. (BTC)
Pipefitter Chargehand/Pipefitter Foreman
May 1986 to April 1988
KUWAIT NATIONAL PETROLEUM CORP. (KNPC)
Minah Abdullah Oil Refinery Modernazation Project
(270,000 BBL a Day Atmospheric Crude Oil Distillation Oil Refinery)
Worked with an eight man crew in the retrofit works of existing Slipperway pipelines to Tank Farm, and worked with Tie-ins lines to existing In Service lines that includes:
1 inch to 36 inches Carbon Steel pipes .
Installation and retrofit works includes lay out, pipe cutting/beveling, grinding, assemble, flange bolting to a required torque, fit-up/install valves and fittings, pipe shoes, performed Tag out/Lock out for every system worked, use of pressurized balloons and mud packs inside pipelines to isolate gas fumes from existing in service line during Hot works, use of gas detecting device to check allowable level of gas fumes during Hot works, prepare and secure daily Hot work permit, and use of testing equipment to check systems for leaks.
Construction and Development Corp. of the Philippines (CDCP)
May 1980 to December 1984
600 MGAL a DAY LA MESA WATER TREATMENT PLANT
Worked directly in the field in the installation and erection of pipeworks and mechanical components:
20 inches Bell and Spigot Cast Iron pipes - Settling Basin Sedimentation drain
18 inches Spiral/Welded (Cement/Mortar lined) pipes connecting - 3 Units -
125 HP-110 GPM- 3 Stage -Vertical Turbine Pumps for Surface Wash
Water system and in Water Filtration System.
16 inches Spiral/Welded (Cement/Mortar lined) pipes connecting- 4 Units –
120 HP - 1000Gpm- 3 Stage -Vertical Turbine Pumps for Wash water
6 inches Carbon Steel pipes connecting – 1 Unit Constant Pressure / Variable
Speed Drive (2 – 4 inches Centrifugal Pumps) - for plant Domestic Water
½ inch to 4 inches PVC pipes connecting Flouridation, and Chlorination
System and in Filter water basin.
48 Units -1.5 KW Motor Operated (Cast Iron) Sluice Gates - for Filter
basin influent and Surface Washwater and Backwashing system effluent.
Works includes scheduling of materials, equipments, tools, and manpower required in the field, prepare Daily Foreman’s Report, lay out and works with Blueprints, shop Drawing, and Specifications, and make detailed sketches, schematic drawings for fabrication and installation.
University of San Agustin, Iloilo City, Philippines
Bachelor of Science in Mechanical Engineering , 1974-1979
Completed a Five-year curriculum of Bachelor of Science in Mechanical Engineering
Hydronic Piping - April, 2008
Associated Builders and Contractors Inc., Las Vegas, NV (ABC Las Vegas Chapter - Education Department)
HVAC Technology / Universal Technician/EPA 608 – September, 2005
Quality Technical Training Center , Las Vegas, NV
Occupational Safety and Health Administration (OSHA) : January, 20011
OSHA 10 and OSHA 30
Shielded Metal Arc Weldng (SMAW/Stick ) – October, 1980
Dravo Skill Builders(CDCP/Dravo-Philippines) – Manila, Philippines